Driver Modem Huawei E5372s -

Download a trusted version of the package (commonly version 5.05.01.00 or newer for Windows 10/11 compatibility).

Windows 7, Windows 8, Windows 10, Windows 11 (32-bit and 64-bit systems) Step-by-Step Guide to Installing Huawei E5372s Drivers

While the Huawei E5372s transmits a Wi-Fi signal out of the box, a direct USB connection to your PC or laptop offers several distinct advantages: Driver Modem Huawei E5372s

If the auto-installation fails, you may need to download the drivers manually.

If the IP address 192.168.8.1 conflicts with other IP addresses on your network, the Mobile WiFi will automatically change its IP address. You can check the current IP address on the device's OLED screen. Download a trusted version of the package (commonly

Elimination of random disconnections caused by generic operating system drivers. Technical Specifications Overview

To ensure your computer correctly identifies the modem when connected via USB, you may need one of the following software packages: You can check the current IP address on

By default, the E5372s presents a virtual CD-ROM every time you plug it in, which can conflict with drivers. Use the Huawei_CD_ROM_Switcher.exe (available on GitHub or XDA Forums) to set the modem to "Modem Mode Only." This prevents the CD-ROM from mounting and forces the NDIS driver to take control immediately.

Complete Guide to Downloading and Installing the Huawei E5372s Modem Driver

: Run the Huawei Flasher tool, select "Select Firmware", and extract the trigger firmware file. After extraction, choose "Flash Modem" and then "Resurrect Mode" to begin the flashing process. The tool may complain about a mismatched device, but you can safely ignore this warning and proceed.

Sometimes, Windows only sees the Huawei E5372s as a CD-ROM drive or a storage device, rather than as a network modem. This usually means the device is still in "installer mode". Right-click the Huawei Mobile WiFi drive, select "Eject", and then unplug and reconnect the device. The driver installation should proceed normally, and the device will then appear as a network adapter.