Program Epson 1390 Resetter !new!: Adjustment

Inside your Epson 1390, there are physical foam pads called waste ink pads. Every time your printer cleans its printhead or primes the ink cartridges, a small amount of ink is pumped out and directed into these pads.

Both red light indicators (ink and paper) flash simultaneously.

Due to copyright, I cannot host the file, but these sources are commonly referenced in repair circles: Adjustment Program Epson 1390 Resetter

The Epson 1390 Resetter is a utility software used to reset the internal counter of the printer. Epson printers have a waste ink pad counter that keeps track of how much ink is flushed into the absorbent pads during cleaning cycles. When the counter hits a pre-set limit, the printer stops working to prevent ink from overflowing and damaging your desk or internal circuits.

It is critical to understand that the Adjustment Program only resets the —it does not magically clean or empty the physical sponge pads inside your machine. Inside your Epson 1390, there are physical foam

Ensure you are running the program on a compatible version of Windows (compatibility mode for Windows 7 or XP often helps on modern Windows 10 or 11 environments) and that your antivirus is not blocking execution. Conclusion

Troubleshooting Your Epson 1390: The Ultimate Guide to the Adjustment Program Resetter Epson Stylus Photo 1390 Due to copyright, I cannot host the file,

Scroll down the list to find the section. Select Waste ink pad counter and click OK . Step 5: Check the Current Status

If you encounter this error during the process, it usually means: The printer is not properly connected via USB. Another program is using the printer.

Open the extracted folder, right-click on the AdjProg.exe file, and select Run as Administrator .

This is a software lock, meaning even if you clean or replace the physical pads, the printer will not function until the digital counter is reset to 0%. This is exactly what the Adjustment Program does. What is the Epson 1390 Adjustment Program?