Easy Print ES-9930U is a direct thermal label printer primarily used for shipping labels (such as Shopee or Lazada) and barcodes. Because it uses thermal technology , it does not require ink; instead, you must use thermal-sensitive paper thermal labels easyprinterthailand Compatible Paper Types The ES-9930U is designed to work with: Direct Thermal Labels
To get your printer up and running, you need to download the official driver corresponding to your computer's operating system. 1. Where to Find the Driver
Go to Control Panel > Devices and Printers . Right-click the ES-9930U, choose Printing Preferences , and set the page size to 4.00 x 6.00 inches (or 100mm x 150mm). easy print es-9930u driver
The Easy Print ES-9930U is not officially supported on Linux, but the community has created solutions.
Go to your computer's Devices and Printers menu. If the ES-9930U is greyed out, right-click and select "See what's printing" , then ensure "Use Printer Offline" is unchecked. 2. The Label is Blank or Smudged Easy Print ES-9930U is a direct thermal label
Follow these simple steps to get your printer up and running fast. Step 1: Connect Your Hardware Plug the power cable into your Easy Print ES-9930U. Connect the USB cable to your computer. Turn on the printer power switch. Make sure the status light turns green. Step 2: Download the Driver File Visit the official website listed in your printer manual. Look for the or Support section. Search for the ES-9930U model. Select the version that matches your computer system. Click download to save the setup file. Step 3: Run the Installation Wizard Double-click the downloaded file to open it. Choose your language. Click Next and accept the license terms. Select USB as your connection type when prompted. Click Install and wait for the progress bar to finish. Click Finish and restart your computer if asked. ⚙️ How to Configure Your Printer Settings
Ensure the driver supports M1/M2/M3 chips natively or via Rosetta 2. ⚙️ Section 2: Step-by-Step Installation Guide Where to Find the Driver Go to Control
Open Device Manager , right-click the unknown device with the yellow warning triangle, and select Update Driver . Choose Browse my computer for drivers and point the folder path to your extracted Easy Print driver download. Wrapping Up
Click and print a test page to verify alignment before processing live orders.
: Unplug the USB cable, restart the printer, and plug it into a different USB port directly on the motherboard (avoid using external USB hubs). Fix 2: "Printer Offline" Error
When using third‑party sites, always download from trusted sources and scan any executable with your antivirus software before running it. The correct driver for the ES‑9930U may be listed under “Easy Print Utility” rather than simply “ES‑9930U driver”, so keep an open mind when searching.