Every time your printer performs a printhead cleaning cycle, boots up, or completes a print job, a small amount of ink is purged to keep the nozzles clear. This excess ink gets funneled to porous foam pads at the base of the printer, known as waste ink pads.
After resetting, consider installing an external waste ink tank or physically cleaning/replacing the pad to prevent real overflow.
Ensure the printer is powered on and physically connected, even if the red lights are flashing. epson adjustment program sx 125 free
Select "Waste ink pad counter" and click OK.
Click "Select" and choose your model (SX125) and port (USB-...). Enter Maintenance Menu: Click "Particular Adjustment Mode". Every time your printer performs a printhead cleaning
The is a powerful service utility, model-specific software that grants direct access to your printer's internal settings. It is primarily used by authorized service centers, but has become popular among advanced DIY users.
Resetting the software counter does not clean the physical ink pads. If you do not physically replace or clean the pads, excess ink will eventually leak out and damage the printer or your desk. Ensure the printer is powered on and physically
Click the button. The program will read your printer's current usage and display the exact percentage and point count.
This state occurs because the printer's internal has reached its maximum calculated capacity. Fortunately, you can fix this issue without paying for a professional repair service. Utilizing diagnostic software allows you to clear the error yourself.
In the dimly lit basement office, the air smelled of ozone and stale coffee. Arthur stared at his Epson SX125