Canon Service Mode Tool: Version 1050

Next, locate the section, ensure it is set to Main , and click Set to force the value back to 0.

As Canon moves to more integrated systems (ARM-based SoCs, encrypted firmwares, and cloud-linked chips), the era of simple USB service tools is ending. Canon has introduced and Cloud Diagnostic Tools for newer imageRUNNER ADVANCE and PIXMA GX series. Version 1050 may be the last truly universal offline service tool.

Release the button. The green light will flash briefly and then stay solid, indicating the device is successfully in Service Mode. How to Use the ST1050 Software

Connect the printer to the PC via USB cable (Wi-Fi will not work). Open the ServiceTool_v1050.exe . Ensure your printer is recognized by the tool. Under the "Clear Ink Counter" section, select "Main". Under "Ink Absorber Counter", click "Set". canon service mode tool version 1050

The Canon Service Mode Tool (often referred to as the Service Tool or Resetter) is proprietary software used by service technicians to communicate directly with the printer's mainboard (logic board).

Canon printers enter a locked state when internal components reach their lifecycle end. The V1050 tool communicates directly with the printer firmware to override these locks. It resolves hardware blockages without physical part replacements. Core Functions

While holding Power, release Resume. Press the Resume button twice , then release the Power button. Next, locate the section, ensure it is set

The Service Tool is portable—just download, extract, and run.

The Ultimate Guide to Canon Service Mode Tool Version 1050 When Canon inkjet printers encounter hardware locks or internal errors, standard troubleshooting rarely suffices. Printers often halt operations due to an "Ink Absorber Full" error (error codes like 5B00 or 1700).

Canonical Service Mode Tool v1050 is a powerful technician utility useful for deep maintenance and troubleshooting, but it carries risks if misused. Only authorized personnel or knowledgeable owners should operate it, following official guidance. Version 1050 may be the last truly universal

While still holding the button, press the Stop/Reset button exactly 5 times. The LED light will alternate between orange and green with each press.

Note: Interface may vary slightly depending on the specific cracked/modded version of the tool found online.

Includes functions for deep print head cleaning, nozzle checks, and clearing specific error logs.

A pop-up box saying "A function was finished" will appear. Click OK.