Stc-600 Temperature Controller Manual - Pdf

Understanding the electrical and physical limits of the STC-600 prevents installation errors and hardware damage. Physical Dimensions 75 mm (Length) × 34.5 mm (Width)

| Parameter | Value | |-----------|-------| | Power Supply | 110V–220V AC / DC (50–60Hz) | | Display Range | -50°C to +120°C | | Control Range | -50°C to +120°C | | Measurement Accuracy | ±1°C | | Resolution | 0.1°C | | Sensor Type | NTC 10K (waterproof probe, length 2m) | | Relay Output 1 (Cooling) | 10A / 250V AC | | Relay Output 2 (Heating) | 10A / 250V AC | | Power Consumption | <3W | | Working Environment | -10°C to +60°C, RH <85% | | Dimensions | 75×34×85 mm (panel cutout: 71×29 mm) |

The front panel of the STC-600 consists of a digital display, indicator lights, and four primary control buttons:

The is a high-precision digital thermostat designed for refrigeration and cooling systems. It features a measuring range of -50°C to +50°C and is commonly used in commercial refrigeration, freezers, and industrial cooling units. Key Technical Specifications

Disconnect all power sources before wiring the device to prevent electrical shock or damage to the controller. Stc-600 Temperature Controller Manual Pdf

The STC-600 temperature controller is a popular and widely used device in various industries, including food processing, pharmaceuticals, and HVAC. This temperature controller is designed to provide precise temperature control, and its manual is essential for users to understand its features, operation, and troubleshooting. In this article, we will provide an in-depth guide to the STC-600 temperature controller manual PDF, covering its key features, installation, operation, and maintenance.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Note: The relay output is a "dry contact" switch. You must route live power through the relay to power your cooling or heating element. 🎛️ Indicator Lights & Display Meanings

What are you wiring this to (e.g., refrigerator, incubator, aquarium)? Understanding the electrical and physical limits of the

: If the sensor experiences a short or open circuit, the display typically shows "EE" and triggers an audible buzzer.

Use the ▲/▼ buttons to scroll through the following parameters:

±1°C (-40°C to +50°C); ±2°C for other ranges Relay Output Capacity: Cooling Relay: 10A / 220VAC Defrost/Alarm Relay: 10A / 220VAC Sensor Type: NTC Sensor (Cable length typically 2 meters) Front Panel Waterproof Rating: IP65 Operating Ambient Temperature: 0°C to +60°C Storage Temperature: -30°C to +75°C Relative Humidity: 20% to 85% (No condensate) 2. Wiring Diagram and Installation

For more advanced configuration, such as changing compressor delay times or defrost cycles, you may need to enter the administrator menu. Press SET + Down Arrow together for 10 seconds. 3. Key Parameters Defined Set Temperature (S): The desired storage temperature. In this article, we will provide an in-depth

Ultimate Guide to the STC-600 Temperature Controller: Manual, Setup, and Troubleshooting

The temperature probe is damaged, disconnected, or short-circuited. Check sensor connections.

Here are the general steps for installing the STC-600 temperature controller: